User`s manual

MENU Close : IRIS CLOSE KEY

■ POWER ON RESET

The unit is initialized.

■ PAN/TILT INIT

1. PAN/TILT MENU is initialized.

2. PAN/TILT location is initialized.

■ CAMERA INIT

Only CAMERA setting menu is initialized..

■ AUTO SEQ INIT

1. Only AUTO SEQ menu is initialized.

2. Setting angle of PRESET and Memory of PATTERN are not initialized.

■ PRIVACY ZONE INIT

PRIVACY ZONE is initialized.

■ FACTORY INIT

All set ups are initialized as a factory default.

※ WTX-1200A – Simple PRESET Setting ※

It works when OSD MENU is not activated.

e.g.> How to set up PRESET 1

1. Place PAN/TILT/ZOOM to a desirable place by Joystick.

2. Press Keypad No. 1.

3. Press F1 Key till “SET OK” appears in the bottom right on the screen.

When setting PRESET by the shortcut key, PRESET can be set in No.1-No.64 and, regarding over No.65, it should