User`s manual

37
MENU Shift : UP, DOWN, LEFT, RIGHT KEY
MENU Open : IRIS OPEN KEY
MENU Close : IRIS CLOSE KEY
■ PATT DEFINE
OFF : PATTERN is cancelled
ON : PATTERN is set up.
If operating it in AUTO RUN, PATT DEFINE should to be ON.
■ NAME
It changes PATTERN Name..
How to set up is as follows..
1. After changing PATTERN NAME DEF from OFF to <ON>, press IRIS OPEN KEY.
2. How to change the name is the same as “1.2 CAMERA NAME DISPLAY”.
■ PATT RECORD
OFF : PATTERN is not memorized.
ON : PATTERN is momorized.
How to set up PATTERN
1. After PATT RECORD changes from OFF to <ON>, press IRIS OPEN KEY.
MEMORY FILL: XXX ( Recorded )
START:IRIS OPEN
EXIT:IRIS CLOSE
PAN/TILT Shift :UP,DOWN,LEFT,RIGHT
2. Move PAN/TILT to the desirable position before starting PATTERN.
3. Press IRIS OPEN KEY to start the process
4. Press IRIS CLOSE to save the process.
* Caution *
1. If there is no PAN/TILT movement, no PATTERN is memorized.
2. The value of Brightness, WDR, ATW is applied to the setting values on the OSD.
4. ZONE SET
1.AREA SEL
1 ~ 8
2.AREA DEFINE
OFF/ON
3.AREA NEW SET
OFF/ON