User`s guide

Chapter 4 - The Vision Menus 95
Bottom Margin: This is the bottom margin of your plate. Autoplate will
not let text inside of this margin.
Left Margin: This is the left margin of your plate. Autoplate will not let
text inside of this margin.
Right Margin: This is the right margin of your plate. Autoplate will not let
text inside of this margin.
Note: Autoplate will automatically calculate the margins. The only reason
to change them is if you would like to enter different values than the
suggested values.
Ratios: This number is used to calculate letter heights. It is relative to all of
the other line’s ratios. Ex. If you have one line that has a ratio of 2 and one
line that has a ratio of 1, the line with the 2 will be exactly 2 times larger
than the line with a ratio of 1.
Height: This number is used to calculate letter heights. You can enter the
exact letter height for each line.
Space: This number is used to create more space around a line. The higher
the number you enter, the more space there will be around that line.
Note: The space is added above and below the line specified.
Clear: This button will clear all of the numbers and return them to what they
were the previous time you were in autolayout.
If you use the Autoplate feature after creating multiple plates, then the
Autoplate feature will ONLY apply to the current plate. The other plates in
the multiple will remain unchanged.