User`s guide

Chapter 3 - Using Vision - The Basics 33
Be sure to note the VISION version number at the left side of the
line. When calling for software support you will be required to
provide this version number as well as your software protection
key serial number.
B. Menu select line
The name of each menu describes its contents. For example, all
operations to do with files and jobs are listed under the FILE
menu.
To select a menu, either position the mouse on the desired menu
and click the left button, or hold down the ALT key and press the
capital letter in the menu name. For example, to open the file
menu by keyboard, hold down the Alt key and press F.
You will notice as you open these menus that some of the
functions are grayed out and that you cannot select them. They
are designed to only work when there is a job open.
If you have chosen the wrong menu item, either move the mouse
pointer to the correct menu item, click and it will open, or press
the escape key once and then press the letter that represents the
option.
A list of options will appear under each main heading. To select
one of them, you can either point to it with the mouse and click or
you can use the up/down arrow keys to move to the correct line
and press the ENTER key.
C. Toolbar