User manual

Introduction 5

1 Introduction

About This Manual

This manual is designed to provide you with information about your Vision VE810 Series 3 engraver.

Beginning with unpacking the machine and continuing through installation, operation and lifetime

machine maintenance, this manual does not attempt to teach the user how to become an expert in

engraving, computer usage, or engraving software usage. Some previous knowledge of engraving

terms and the engraving process is certainly beneficial. For information on the Vision Engraving

Software, see the Vision Engraving Software manual. For more information on your individual

computer system, see your computer's user manual or contact your computer distributor.

1.1 Disclaimer and Warranty Information

Limits of Liability / Disclaimer of Warranty

The information contained within this manual has been carefully checked and is believed to be

accurate, however, Vision makes no representations or warranties for this manual, and assumes no

responsibility for inaccuracies, errors, or omissions that may be contained within this manual. In no

event shall Vision be liable for any loss of profit including (but not limited to) direct, indirect, special,

incidental, consequential, or other damages resulting from any defect or omission in this manual, even

if previously advised of the possibility of such damages.

In the interest of continued product development, Vision reserves the right to make improvements to this

manual and the products it describes at any time, without notice or obligation.

Limited Warranty:

Vision Computerized Engraving and Routing Systems (and Retrofit Tables)

Vision Computerized Engraving and Routing Systems (Vision) warrants that for a period of one (1) year

from the date of shipment to the original purchaser of either a Phoenix, Vision or Table Retrofit (the

System), that the System will be free from defects in material and workmanship under normal use and

service. Upon written notification, we will transfer the remaining warranty to a new customer. This

warranty shall cover all elements except for items covered by separate manufacturer’s warranties

and consumable items. “Consumable” items include, but shall not be limited to, belts, brushes,

lubricants, and cutters furnished with the System, for which no warranty is provided.

In the event a defect is discovered during the warranty period, within thirty days of discovery, but no

later than the last day of the warranty period as described above, the user shall contact Vision for

instructions regarding disposition of the problem. Vision shall, at its option, either (1) repair the affected

product with new or refurbished parts, or (2) provide a replacement. Any incidental costs, including the

cost of shipment from the user’s location to the point of repair and return, and any installation

performed by the user, shall be at the expense of the user.

This warranty covers normal use only and shall be void in the event that the System is altered or

modified without authorization by Vision, or is subject to abuse, neglect, or other misuse by the user.

The warranties for Third-Party Hardware and Third-Party Software shall run directly from the

manufacturers of such hardware and software to the user. Vision makes no warranties, expressed or

implied, with regard to Third-Party Hardware or Third-Party Software.