User manual

Installation 17
© 2012 Vision Engraving and Routing Systems
3.1.2 Network Connection
Connecting via Standard Network Cable to Network
Once you have connected your machine to your network, turn the machine on. Wait for the machine
to initialize; the LCD will display "Go to Home".
NOTE - This installation is performed on a Windows 7 PC. For Windows Vista or Windows XP, the
screens are slightly different.
Open the folder where you have unzipped the Vision Machine Tools 4 software, locate the file called
Setup and double click on it to begin the installation.
Select your machine from the list and select OK to add this machine to the Connection Manager.
The installation will proceed.