User manual

Installation 13

At the completion of the Machine Tools setup, select OK.

A restart of the computer may be necessary in order for Windows to register the software. Select Yes,

I want to restart my computer now, then select Finish.

The computer's IP address will need to be set. NOTE - this should not cause any conflicts with your

computer's wireless IP address, which is determined by the computer's wireless network card. To set

the computer's IP address, open the Window's Control Panel. Depending on how you have this folder

set, you will either see Network and Internet, or you will see the Network and Sharing Center

immediately. If you see Network and Internet, select View Network Status and Tasks (which opens the

Network and Sharing Center). If you see the Network and Sharing Center, open it. Then select Local

Area Connection (as shown below).