Manualshelf

User manual

ManualsBrandsVision ManualsEngraverVE-810
919293949596979899100
VE810 Series 3 User Manual100
© 2012 Vision Engraving and Routing Systems
Motor Belt Removal/Replacement
To remove the motor belt, roll the front edge of the belt up towards the top of the spindle and over the lip
at the top. To replace the belt, align the belt in the motor pulley and pull the belt forward and roll it down
over the front edge of the lip on the top of the spindle. Do not excessively stretch the belt when replacing
it.