User manual

Chapter 6 - Troubleshooting 59
Problem: Spindle is hot.
Possible solutions:
1. Ensure that the nose cone area is free of debris. Check the vacuum system (if used) for
clogging.
2. Inspect the spindle for other obstructions that may prevent proper rotation.
3. The spindle bearings may need to be replaced.
Problem: Spindle motor will not come on.
Possible solutions:
1. Make sure that the Engraving Motor option is selected on the Vision Engrave Screen
(F9).
2. Check motor brushes. See chapter 5.
Problem: Motor belt will not stay on pulley.
Possible solutions:
1. Motor belt is probably worn and needs to be replaced. See Chapter 5 - Changing the
motor belt.