User manual

18 VE810 Engraver Manual
Fig. 1
Fuse and voltage
“select” cartridge
Locking tab
Fig. 2
Fig. 3
Fuse holder
Locking tab
Voltage selection cartridge
Voltage selector window
Connector housing
Fig. 4
The serial connection is where you connect the computer to the VE-810. The VE-810
accessory box contains a white serial cable. Connect one end to the VE-810 and screw in
the thumbscrews. The other end connects to your computer.
Your computer will have one of two different types of serial port connectors on the back.
One will be a 9-pin connector and the other will be a 25-pin connector. If you have a 9-pin
connector, you can plug the white serial cable directly into the computer. If your computer
has a 25-pin connector, you can use the 9-pin to 25-pin adapter included with the VE-810
to connect the cable to your computer. (See Fig 2.2 below)