T60 TREADMILL T60 1600 Landmark Drive • Cottage Grove, WI 53527, USA www.visionfitness.com Dec.
TREADMILL T60 TABLE OF CONTENTS INSTRUCTION 02 IMPORTANT SAFETY INSTRUCTIONS 03 SETUP THE TREADMILL 05 • • • • • • Getting Started Making A Choice Of Site Stabilizing The Treadmill Centering The Belt.
TREADMILL T60 TREADMILL T60 INSTRUCTION IMPORTANT SAFETY INSTRUCTIONS This Owner’s Manual describes the functions of the following product: Treadmills T60 READ AND SAVE ALL INSTRUCTIONS before assembling or using this treadmill. It is strongly recommended to take the following safety instructions. See "Product Specifications" (Page 28) in this manual for product specific features, the T60 is intended for commercial use.
TREADMILL T60 TREADMILL T60 SETUP THE TREADMILL • Never mount or dismount the treadmill while the running belt is moving. • Handrails may be held to enhance stability as needed, but are not for continuous use. • Do not wear any clothing that might catch on any moving parts of this treadmill. GETTING STARTED Read the Owner’s Manual before setting up the T60. Place the treadmill where it will be used before beginning the setup procedure. • Never walk or jog backwards on the treadmill.
TREADMILL T60 TREADMILL T60 CENTERING THE BELT After installing and leveling the treadmill, check the belt to ensure that it is tracking properly. The belt might need to be adjusted after the first two hours of use. If the belt needs to be adjusted, please see ADJUSTING THE BELT at the section of MAINTENANCE for details. ELECTRICAL POWER REQUIREMENT The treadmill requires a dedicated line according to the electrical configurations listed in the chart below.
TREADMILL T60 TREADMILL T60 ASSEMBLY INSTRUCTIONS ASSEMBLY EXPLODED DIAGRAM Please make sure that the power plug is not plugged into the wall outlet while assembling the treadmill. Ensure correct assembly of the T60, carefully read and follow these steps: FASTENERS PART NO. DESCRIPTION SKETCH QUANTITY Z05 8mm T-SHAPED WRENCH 1 Z50 HEX SOCKET THIN HEAD SCREW(M8*1.5P*15L) 10 NOTE WHITE Q04 Z51 ARC WASHER (Ø8.2*Ø18*1.5T) 2 WHITE Z53 PHILLIP BUTTON HEAD SCREW (M5*0.
TREADMILL T60 TREADMILL T60 ASSEMBLY STEPS STEP 2: Secure The Left And Right Console Mast ATTENTION: After installation is completed, the treadmill will need to be calibrated by a.Attach the left console mast by placing it into the console mast support bracket and using the AUTO-CHECK function. If this is not done, the treadmill's speed and incline values may be incorrect and damage the treadmill. DO NOT stand on the belt when aligning the mounting holes. b.
TREADMILL T60 TREADMILL T60 STEP 3: Attach The Console To The Console Mast Diagram 2 a.Route the display cable through the right console mast and pull it out of the hole on the side of the console mast near the frame. Ask an assistant to hold the console in place while Q04 you route the cable through the console mast. b.Attach the console to the right and left console mast using six screws (Z54) and washers Z50 Q05 (Z55)(Z56) to secure. c.
TREADMILL T60 TREADMILL T60 STEP 4: Replace The Motor Cover STEP 5: Calibrate The Treadmill a.Replace the motor cover on the treadmill using buttonhead cross screws (Z53) to Enter the Manager’s Custom Mode to execute P16 AUTO CHECK. The treadmill’s INCLINE secure them. will be calibrated automatically. This will take around 1 minute to run. After the completion of calibration, press EMERGENCY STOP key twice to back to the inital starting screen. b.
TREADMILL T60 TREADMILL T60 USING THE WORKOUTS 1. Without anyone standing on the treadmill, plug the power cord into a dedicated electrical outlet. 2. The On/Off switch for the treadmill is located next to the power supply plug in. Turn the switch to the on "I" position to activate the treadmill. 3.
TREADMILL T60 TREADMILL T60 WORKOUT OVERVIEWS PROGRAM DEFAULT TIME DESCRIPTION PROMPT INPUT PROGRAM CONTROL QUICK START Quick Start is the fastest way to begin exercising and bypasses the setup prompts. After pressing the QUICK START key, a constant-level workout begins, and the speed and incline do not change automatically. N/A N/A N/A MANUAL Manual is a constant effort workout in which the user can change incline or speed at any time.
TREADMILL T60 TREADMILL T60 WORKOUT SETUP STEPS WORKOUT TIPS • Vision Fitness strongly recommends seeing a physician for a complete medical exam before undertaking an exercise program. If, at any time while exercising, the user experiences faintness, dizziness, pain, or shortness of breathe, he or she must stop immediately. • Without anyone standing on the treadmill, plug the power cord into a dedicated electrical outlet. • The On/Off switch for the treadmill is located next to the power supply plug in.
TREADMILL T60 TREADMILL T60 4) “SELECT START SPEED” using the NUMBER keys or SPEED 5) “SELECT WEIGHT” using the NUMBER keys or SPEED 6) Press GO to begin the workout keys, and then press SELECT. keys, and then press SELECT. C) CALORIES GOAL 1) Press the “GOAL+” key and use SPEED keys to select “CALORIES GOAL”. 2) “SELECT CALORIES” using the NUMBER keys or SPEED keys, and then press SELECT. 3) “SELECT START INCLINE” using the NUMBER keys or SPEED keys, and then press SELECT.
TREADMILL T60 TREADMILL T60 THE LIST OF MANAGER’s CUSTOM MODE CUSTOM SETTING P0 DEFAULT MINIMUM MAXIMUM MAXIMUM 99 TIME P1 DEFAULT TIME 20 P2 DEFAULT LEVEL 1 DEFAULT WEIGHT 68 kg / 150 lbs P3 P4 P5 DEFAULT AGE 30 10 10 1 34 kg / 75 lbs 10 MAXIMUM 20 kph / 6.
TREADMILL T60 TREADMILL T60 MAINTENANCE The T60 is built for use in the light commercial environment - 8 hours a day and seven days a week. However, as a club manager or owner, you are responsible for cleaning and maintaining the unit’s integrity. If you fail to maintain the treadmill as described below, it could affect or void the Johnson limited warranty.
TREADMILL T60 PRODUCT SPECIFICATIONS Model T60 Console Display Screen Workout Profile Window – 10 × 14 green LED dot-matrix display Instruction Center – 19-character red LED alphanumeric display Informational Display – 3 numeric 7-segment display (3 sets) Display Readout Time, Pace, Incline, Distance, Speed, Level, Calories, METS, Target HR, Actual HR, Profile Programs Manual, Interval, Goal+(Time Goal, Distance Goal, Calories Goal), Random, Heart Rate+(Target HR, Weight Loss [ includes BMI Test ]),
