Instruction manual

41
GENERAL
USER ENGINEERING MODE (DELUXE Only, Continued)
ACCUMULATED TIME
P9 represents accumulated time in hours. To exit, press STOP. This
information cannot be modified.
ACCUMULATED DISTANCE
P10 represents accumulated distance, in either miles or kilometers. To exit,
press STOP. This information cannot be modified.
PAUSE TIME
P14 represents the pause time. The default pause time is five minutes. You
can modify the pause time from 20 seconds to 10 minutes. You can
modify this time by using the number keys or the SPEED or ELEVATION
arrows. Press and hold ENTER to save the new value.
DEFAULT TIME
P15 represents the program default time. Most programs have a default time
of 30 minutes. You can modify this time by using the number keys or the
SPEED or ELEVATION arrows. Press and hold ENTER to save the new value.
DEFAULT AGE
P16 represents the default age. The Treadmill comes with the default age
of 40. You can modify the age by using the number keys or the SPEED or
ELEVATION arrows. Press and hold ENTER to save the new value.
DISABLE BEEP
P17 represents disable beep. You can disable the console beep using the
SPEED or ELEVATION arrows to select either “0” (beep off) or “1” (beep on).
Press and hold ENTER to save the new value.
SET LANGUAGE
P18 represents the default language. The Treadmill comes with the default
language of English. You can modify the language by using the the SPEED
or ELEVATION arrows. Press and hold ENTER to save the new value.