Service manual

2.6.2 ENGINEERING MODE (Touch Console) - Settings Tab

The Settings Tab used to set the Machine Type, Model and if the Energy Saver is turned on.

Setting: Pressing the

will automatically bring up the corresponding select block, according to the

frame type to select the appropriate machine, TREADMILL, ELLIPTICAL or BIKE.

Use the same procedure as Machine Type to set the Model Type, Energy Saver, First Boot and Program Speed.

2.6.3

ENGINEERING MODE (Touch Console) – Default Tab

The Default Tab displays the default information of the console, such as Workout Time, Weight, Age etc…

Selecting the data that needs to be set will bring up a slider to adjust the corresponding information. Refer to the figure

below:

automatically bring up

the corresponding

select block