Service manual

10
CHAPTER 2: Engineering Mode
2.4 ENGINEERING MODE OVERVIEW - Elegant Console
2.4.1 ENGINEERING MODE (Elegant Console) – About
The Engineering Mode displays the basic parameters of the console, such as Model Type, Software Version, MCB Version,
etc…
Use the ATM style keys located on both sides of the screen to enter into the parameter.
NOTE：Navigation of the other Engineering Mode screens is the same, instructions are not repeated.
Engineer Mode
- About
Function & Default Descriptions Modified
Accumulated
Data
Accumulated Distance Total distance displayed in native
units (miles or kilometers), not
editable
Cannot be modified
Accumulated Time Total time, not editable Cannot be modified
Main Board
Information
UI Software Version Application version, not editable Cannot be modified
IO Version Sub UCB software version, not editable Cannot be modified
OS Version Operation System Version, not editable Cannot be modified
MCB
Information
MCB Type The frame MCB type, for example:
2.75HP digital MCB
Cannot be modified
MCB Software Version MCB Software Version Cannot be modified
Arrows point directly to the
corresponding ATM style key