Owner`s manual
6
ENGLISH
TROUBLE SHOOTING
If you experience a problem, you should narrow down if the
problem is with a faulty cable, or a faulty snap-in module. For
example, if you cannot get the VGA output of your computer to
work:
1. Test a short 2m VGA cable between the projector and
computer to make sure it is working.
2. Cut one end o the same cable, strip back wires, and aach to
the techconnect module.
If the image is now displayed, the problem is with your long
cable and you should replace it. If the problem persists, you have
either wired the wrong cables to the wrong terminals, or the
module is faulty.