TECHCONNECT TC2-HDMI41 OWNERS MANUAL www.visionaudiovisual.com/techconnect/tc2-hdmi41 1 TC2-HDMI41_manual_en_v2.
DECLARATION OF CONFORMITY Where applicable Vision products are certified and comply with all known local regulations to a ‘CB Certification’ standard. Vision commits to ensure all products are fully compliant with all applicable certification standards for sale in the EU and other participating countries. The product described in this owner manual is in compliance with RoHS (EU directive 2002/95/EC), and WEEE (EU directive 2002/96/EC) standards.
USE ONLY DOMESTIC AC OUTLETS Connecting the unit to an outlet supplying a higher voltage may create a fire hazard. HANDLE THE POWER CORD WITH CARE Do not disconnect the plug from the AC outlet by pulling the cord; always pull the plug itself. Pulling the cord may damage it. If you do not intend to use your unit for any considerable length of time, unplug the unit. Do not place furniture or other heavy objects on the cord, and try to avoid dropping heavy objects on it. Do not tie a knot in the power cord.
FRONT AND REAR PANELS 1 1. 2. 3. 4. 2 3 4 IR Receiver Input Indictor LEDs Select button Mode button 8 5 5. 6. 7. 8. 9. 10. 6 7 10 9 5V 2A Power input HDMI Inputs HDMI Output RS-232 EDID selector Mini USB-B connector - for firmware updates 4 TC2-HDMI41_manual_en_v2.
INSTALLATION 1. CONNECT INPUTS Plug HDMI cables into inputs. Note input and output cables are not included with this product. 2. CONNECT OUTPUTS 3. TURN MAIN SOURCE DEVICE ON Keep other source devices off at this stage. 4. TURN SWITCHER ON Plug in to mains power and turn on. 5. TURN DISPLAY DEVICE ON MODE The mode button allows the installer to set priorities.
RS-232 CONTROL Baud Rate 9600 bps Data Bits 8 bits Check Bits None Stop Bits 1 bit Flow Control None 1. Switch command: swt+space+xx+enter xx represents: • • • 01~04 Input port 05 Next input e.g. 3 to 4 06 Previous input e.g. 3 to 2 2. Obtain current port: bc+space+enter 3. Standby command: pws+enter 6 TC2-HDMI41_manual_en_v2.
EDID (EXTENDED DISPLAY IDENTIFICATION DATA) This enables the source device to ‘ask’ the display device what resolution it is, and output that resolution. Position Function 000 (default) Use video resolution and audio capabilities of output device. If display device not on switcher defaults to 1080P 3D (stereo audio) 001 Fixed to 1080P 3D (stereo audio) 010 Fixed to 1080P (stereo audio) 011 Fixed to 1080I (stereo audio) 100 Fixed to 1080P (5.1 audio) 101 Fixed to 1080P (7.
SPECIFICATIONS PRODUCT DIMENSIONS:280 x 95 x 24 mm (length x width x height) PACKAGED DIMENSIONS: 300 x 145 x 60 mm PRODUCT WEIGHT: 0.5 kg CONSTRUCTION MATERIAL: Metal COLOUR: White TECHNICAL DETAILS: Input Video Signal: 0.5-1.0 volts p-p Input DDC Signal: 5 volts p-p (TTL) Maximum Video Format Supported: 1080P Audio Format Supported: DTS-HD、Dolby HD、PCM 7.1 Output Video: HDMI 1.
WARRANTY This product comes with a 2-year return to base warranty, effective from the date of purchase. This warranty applies only to the original purchaser and is not transferable. For the avoidance of doubt, this will be taken from the information held by the appointed national distributor at the point of sale. If the product is DOA (dead on arrival), you have 21 days from purchase date to notify the national distributor via your AV reseller.
