Specifications

TC2-AMP4_manual_en

INSTALLATION INSTRUCTIONS

This amplifier module can be attached as a separate product on the wall or be integrated into a

Techconnect connectivity front panel. The example below shows an integrated product.

1. TC2 VGAF3.5MM module

2. 3-Phono module

3. DC Power

4. TC2-AMP4 module

5. Bare-wire speaker terminals

NOTE 1: The speaker cable must be unshielded with a gauge of no less than 0.75mm.

THE WARRANTY WILL BE VOID IF YOU USE UNSUITABLE SHIELDED CABLE.