Datasheet

The Techmount ST (Short Throw) is designed to cater for all ST and
UST projectors with no extra parts required. It features an innovative
new lateral height adjustment which results in easy ne tuning.
Featuring Vision’s popular spider tting, it ts all ultra-short-throw and
short-throw projectors.
1.55M BOOM
The standard boom is 1.55m long, and
a tilting mechanism is included to allow
tilt adjustment for short-throw projectors.
This tilt adjustment allows 20 degrees
of tilt forward, and 20 degrees of tilt
backwards.
EASY UP/DOWN ADJUSTMENT
Ultra short-throw projectors are
susceptible to poor setup; tilting fore
and aft will always result in an inferior
image with uneven focus. The clever
vertical adjustment screw means you
adjust the boom to the correct throw
distance, then turn the screw on
the wall plate for height adjustment.
The projector is kept perfectly
perpendicular to the screen resulting
ina perfectimage.
TELESCOPIC DESIGN
The two-part boom allows easy
adjustment of image size, and extends
up to 1550mm – enough for most short
throw projectors to project an image
2000mm wide – enough for use with a
very large interactive whiteboard (up
to and including 94”) or a standard 2m
projection screen.
MOUNTING TEMPLATE
A useful paper template is included to
help installers locate the wall plate with
respect to common whiteboards.
LIGHTWEIGHT BOOM
The wall plate is made of steel for
rigidity, and the boom is constructed
of aluminium to reduce the overall
cantilever load on the wall, and to allow
excess length to be easily cut off.
PLENTY OF HEADROOM
A limiting factor of short-throw
installations is the ceiling height;
the bigger the image, the higher the
projector needs to be. The Techmount
is designed to mount the projector as
close to the ceiling as possible.
TM-ST Short-Throw
Projector Wall Mount
39
SPECIFICATIONS
POLE LENGTH: 450-1550mm
WALLPLATE FOOTPRINT:
224 X 114mm (height x width)
BOX DIMENSIONS: 1400 x 150 x 140mm
PACKAGED WEIGHT: 5.9kg
SAFE WORKING LOAD:
0-750mm from wall: 7.5kg
750-1550mm from wall: 5.0kg
COLOUR: Satin White
ACCESSORIES INCLUDED:
 1 x 4mm Pin-Hex key
 1 x 5mm Pin-Hex key
 4 x M2.5 43mm pan slot for Optoma & Acer
 4 x M3 43mm screws
 4 x M4 43mm screws
 4 x M5 43mm screws
 4 x M6 43mm screws
 4 x ST8 50mm Wall Fixtures with rawl plugs
 1 x Wall Plate Covers
 1 x Boom Cover
 1 x Tilting Mechanism
 1 x Safety Fall-Arrest Tether
WARRANTY: 2-year return to base
ORDER PART CODE: TM-ST [SAP:1937671]
Ultra-Short-Throw Version with shorter 750mm
boom: TM-UST [SAP: 1702370]
Optional Sanyo XE-50/XL50/XL51 Adaptor:
TM-UST SAN [SAP:1833003]
TECHMOUNT
 Telescopic wall bracket for Ultra-Short-Throw and Short-Throw projectors
 Height adjustment on wall plate allows proper setup resulting in better image
 One-man installation in three easy stages
FINALIST
InAVation Awards
“Mounting Solution
of the Year”
2010
WINNER
AV Awards “Display
Solution of the Year”
2009
“
“
“Ultra-short-throw
projectors should always
be kept perpendicular to
the screen – otherwise
the image will never
look good.”
DAVE SAYS...