Datasheet

TECHMOUNT
TM-1200 Universal
Projector Ceiling Mount
SLOPING CEILINGS?
A tilting mechanism is included
which tilts to a full 90 degrees,
allowing you to use the bracket
as a boom if need be.
SAFETY APPROVED
In line with best-practise a safety
fall-arrest tether is included which
secures the projector to your
bracket. Independent testing
on calibrated test equipment
measured a breaking-strain of
half a ton! We recommend a
maximum safe working load
of 10kg which is well within
the limits of the product and
up to BSi installation standard
specication (PAS122:2009).
EASY FIT
Fitting the bracket to the
projector is simple; most
projectors have threaded inserts
in the bottom for attachment.
Not all use the same diameter
screws we provide a selection to
suit almost all projectors. Simply
adjust the arms on our bracket
over the attachment holes, and
insert a screw into the projector.
OBSTRUCTION-FREE CABLE
MANAGEMENT
Rather than having a bolt that
runs through the pipe and blocks
cable access, we use our unique
quad-bolt ‘chute-through’ system
which leaves cable access clear
– even for a big VGA connector.
TOOLS INCLUDED
A spanner and pin-hex key are
included. The only tool you’ll
need is a 2” pipe cutter (ask
your tool supplier for a cutter
with a 6-67mm range, and a
metal cutting disk). We’ve also
included a drilling jig so you can
easily and accurately drill 9mm
holes into the pole.
SECURE
Quick-release mechanisms
make life easier for thieves,
so the TM-1200 is secure and
featuressecurity bolts.
FINISH THE JOB PROPERLY!
Enhance aesthetics with
the retrottable trim disk
which is tted in false-ceiling
environments to properly nish
the installation.
The Techmount is a universal projector ceiling bracket designed to
secure 99% of data projectors safety and sturdily to ceilings. It has
built in exibility allowing quick assembly in a number of different
congurations, including “ush-mount” where the projector is as
close to the ceiling as possible.
The xed pole has greater rigidity than telescopic mounts and
because it is cut it to length onsite it has an innitely variable
length. The overall length when the tilting mechanism is in place is
1410mm. A 1m male-to-female extension pole is available which
can be daisy-chained.
Order Code: TM-1200 EXT1M [SAP: 1562436]
SPECIFICATIONS
BOX DIMENSIONS: 1300 x 160 x 90mm
PACKAGED WEIGHT: 6kg
SAFE WORKING LOAD: 10kg
COLOUR: Satin White
ACCESSORIES INCLUDED:
 1 x H50 Pin-Hex key
 1 x 17mm Spanner
 4 x M3 43mm screws
 4 x M4 43mm screws
 4 x M5 43mm screws
 4 x M6 43mm screws
 4 x M2.5 43mm pan slot for Optoma & Acer
 4 x M8 50mm Ceiling Fixtures with rawl plugs
 1 x Drilling Jig
 1 x Safety Tether
 1 x Ceiling Trim Disc
WARRANTY: 2-year return to base
COMPLIANCES: TUV-GS Certication
ORDER PART CODE:
TM-1200 [SAP: 1562435]
Optional 1m Extension Pole:
TM-1200 EXT1M [SAP:1562436]
32
 Projector ceiling mount with 1.1m pole cut to length onsite
(overall length 1410mm)
 All parts included e.g. drilling jig, cathedral ceiling
mechanism, trim disc etc.
 Cables can be routed after assembly
“
“
“With the TM-1200
make sure you use
a pipe cutter with a
6-67mm range and
metal cutting disk”
DAVE SAYS...