Specifications
All parts are included in one box. Just
install the transmitter module into the
faceplate, and mount the receiver at
the remote USB device. The receiver
has a low-profile design to fit neatly
into SA4 trunking or Dado rail.
The Techconnect Twist transmitter
is powered by USB so no additional
power adaptors are required.
The USB specification limits the length
of a cable to 5 meters. Converting the
signal to run over a twisted-pair cable
– also known commonly as CAT5 or
Ethernet – allows the signal to travel
up to 50m.
As well as interactive whiteboard
applications, the Techconnect Twist
can be used for other USB devices
which work on USB 1.1 such as
printers and webcams.
As part of the Techconnect
2
family
of products the ‘Twist’ comes with a
transmitter in the form of a modified
USB-B module. To install it just clip
it into place on any Techconnect
2
faceplate.
When a projector is installed on
the ceiling you need a way of
plugging your laptop or other
source equipment into it without
having to clamber up on the
table. The Techconnect modular
faceplate system makes this
simple allowing you to make the
input connectors available on an
easily accessible wall plate.
The normal wall-mounted Techconnect
is ideal if your PC is on a table directly
next to the wall, but in a boardroom
or meeting room where the table is in
the centre of the room, you need those
connectors to be in the centre of the
table for easy connection so you don’t
risk tripping up on ugly cables strewn
across the room.
Mounted into the centre of the table,
touch the button and the motorized
faceplate tilts up offering power, VGA,
audio, and network connections within
handy reach. Integrated safety features
mean if heavy objects are sitting on
top it will not power into position. And
the super-robust motor will not be
damaged if a user mistakenly forces
the lid down by hand after use, rather
than pressing the touch button to make
it power down. The motor is rated to
work over a hundred-thousand times
without failing, meaning years of
reliable service.
The Techconnect Tilt is completely
enclosed and safe.
The hole required in the
table requires a 210mm
diameter. The cleanest way to
cut this hole is with a hole-saw drill
bit, such as a Starrett STRHS210
with an arbour – the same drill bit
that you use to fit our CS-1300
Ceiling speakers. When installed
and ‘off’, the Techconnect Tilt is
almost completely flush with the
table surface. The unique clamping
system allows installation to tables
of varying thickness.
The new Techconnect
2
Twist converts USB
to be run over Ethernet cable, allowing flexible
placement of the AV faceplate with respect to the
interactive whiteboard. Installers are no longer
restricted by the USB 5m maximum cable length.
164 x 145 x 200mm (side x side x height)
3.7kg
Black
Going up: 0.7A, 30n
Going down: 0.45A, 20n
220-226mm
240mm
100-240V, Output
12VDC, 1000mA, 12W
n
1 x Euro IEC Power cable 1.8m long
n
1 x UK IEC Power cable 1.8m long
n
1 x Cutout Template
n
2 x Mounting Ears
n
1 x UK Power Module with IEC
power cable
n
1 x EU Power Module with IEC
power cable
n
2 x VGAF3.5MM Module
n
1 x RJ45 Ethernet Module
n
1 x Twin-RJ45 Module
n
1 x Blank Module
Manu code: TC2-TILT / Part code: 1584482
“
“
DAVE SAYS...
“
“
DAVE SAYS...
95 × 24 ×
21.2mm (length x width x height)
1.1
ABS Plastic
White
n
2 x Mounting Screws
n
1 x Transmitter
n
1 x Receiver
Manu code: TC2-USBTP
Part code: 1795080
“The Vision product range just keeps on getting better and their customer
support has never let us down yet. This enables Midland Technologies to
continue delivering installations that are second to none, at an affordable price.”
Jon Hempson
Midland Technologies Limited