Specifications

The Techmount TM-ST caters for
all Short-Throw and Ultra-Short-
Throw. No extra parts required.










With an innovative new lateral height
adjustment it overcomes many of
the common difficulties of wall boom
installations, resulting in easy setup
and fine tuning.

The wall plate is made of steel for
rigidity, and the boom is extruded
from aluminium to reduce the overall
cantilever load on the wall, and to
allow excess length to be easily
cut off.

Ultra short-throw projectors are
susceptible to poor setup; tilting fore
and aft will always result in an inferior
image with uneven focus. The clever
vertical adjustment screw means you
adjust the boom to the correct throw
distance, and turn the adjustment
screw on the wall plate for height
adjustment. The projector is kept
perfectly perpendicular to the screen
resulting in a perfect image!

One part of the boom slides along the
other part giving a 0-1550mm range
of movement. That’s enough for most
short-throw projectors to project onto
a 78” whiteboard.

The standard boom is 1.5m long,
and a tilting mechanism is included
to allow tilt adjustment for short-throw
projectors.

A useful paper template is included
to help installers locate the wall plate
with respect to common whiteboards.

450-1550mm

224 X 114mm (height x width)

1400x150x140mm
5kg

7.5kg (4.5kg if using extension pole)
Satin White

n
1 x 4mm Pin-Hex key
n
1 x 5mm Pin-Hex key
n
4 x M2.5 43mm pan slot for
Optoma & Acer
n
4 x M3 43mm screws
n
4 x M4 43mm screws
n
4 x M5 43mm screws
n
4 x M6 43mm screws
n
4 x ST8 50mm Wall Fixtures
with rawl plugs
n
1 x Wall Plate Covers
n
1 x Boom Cover
n
1 x Safety Fall-Arrest Tether
n
1 x Tilting Mechanism
Manu code: TM-ST
Part code: 1937671
Optional Sanyo XE-50, XL-50,
and XL-51 Adaptor:
Manu code: TM-UST SAN
Part code: 1833003


“
“






DAVE SAYS...
 
Vision is obsessed with developing
innovative products and backing them up
with great support. If you have any questions
about any of our products, just contact our
support team at www.visionaudiovisual.com
and we will be glad to help.