Specifications
Built in flexibility allows quick
assembly in a number of
configurations including “flush-
mount” where the projector is as
close to the ceiling as possible.
A tilting mechanism is included
which tilts to a full 90 degrees.
A safety fall-arrest tether is
included. Independent testing
on calibrated test equipment
measured a breaking-strain of
half a ton! Vision recommends
a maximum safe working load
of 10kg which is well within
the limits of the product, and
up to BSi installation standard
specification (PAS122:2009).
Fitting the bracket to the
projector is simple; almost all
projectors have threaded inserts
in the bottom for attachment.
Simply adjust the arms over the
attachment holes, and insert a
screw into the projector.
Rather than having a bolt that
runs through the pipe and blocks
cable access, the TM-1200 uses
a unique 4-bolt system which
leaves cable access clear - even
for a big VGA connector and an
IEC power plug.
A spanner and pin-hex key are
included. The only tool you’ll
need is a 2” pipe cutter. TM-
1200 even comes with a unique
drilling jig so you can easily and
accurately drill 9mm holes into
the pole.
Quick-release mechanisms make
projectors easier to steal, so the
TM-1200 features secure security
bolts.
Enhance aesthetics with
the retrofittable trim disk
which is fitted in false-ceiling
environments to properly
finish the installation.
Securing 99% of projectors safety and sturdily to ceilings, the
TM-1200 has a fixed 1.1m pole which is cut to length onsite, so
it suits the professional installer who does multiple installations
a day and wants a fast, flexible product. The fixed pole has
greater rigidity than telescopic mounts and because it is cut it
to length it has an infinitely variable length.
The Techmount TM-CC is
designed for applications where no
‘drop’ is required, so there is no pole is
included and other unnecessary parts
have been stripped out of the kit.
1300 x 160 x 90mm
6kg
10kg
Satin White
n
1 x H50 Pin-Hex key
n
1 x 17mm Spanner
n
4 x M3 43mm screws
n
4 x M4 43mm screws
n
4 x M5 43mm screws
n
4 x M6 43mm screws
n
4 x M2.5 43mm pan slot for
Optoma & Acer
n
4 x M8 50mm Ceiling Fixtures
with rawl plugs
n
1 x Drilling Jig
n
1 x Safety Tether
n
1 x Ceiling Trim Disc
Manu code: TM-1200
Part code: 1562435
Optional 1m Extension Pole:
Manu code: TM-1200 EXT1M
Part code: 1562436
“
“
DAVE SAYS...
n
1 x H50 Pin-Hex key
n
1 x 17mm Spanner
n
4 x M2.5 43mm pan slot
for Optoma & Acer
n
4 x M3 43mm screws
n
4 x M4 43mm screws
n
4 x M5 43mm screws
n
4 x M6 43mm screws
n
4 x M8 50mm Ceiling Fixtures
with rawl plugs
n
1 x Safety Tether
Manu code: TM-CC
Part code: 1932372
244 x174x120mm
1.9kg
10kg
Satin White
360
2-year return to base
High standard of finish and over-
engineered for stability and safety. A
rugged high-quality satin-white finish
blends with ceiling tiles.
The top and bottom parts can rotate
360 degrees, and the spider arms
have a maximum span of 340mm.
Tools are included including a
spanner and pin-hex key.
A tilting mechanism is integrated
allowing you to use the bracket with
cathedral-type ceilings.
As with all projector Techmounts a
safety cable is included to attach
to the projector. The TM-CC has
a recommended maximum safe
working load (SWL) of 10kg which is
well within the limits of the product.
The TM-CC comes with secure pin-
hex bolts to deter thieves.