Specifications
The AV-1301 comes with speaker
cable plus “minijack to 2-phono” and
“2-phono to 2-phono” patch cables
which allow you to connect everything
straight out of the box.
A simple front panel design means
low-tech end users will easily
understand how to get their audio
going. Just turn it on and turn it up.
Capable of driving most common
low-impedance speakers with up to
100w power handling, the AV-1301
delivers clear, crisp sound with low
noise. Natural sound and means
your audience will hear you properly
and with perfect clarity. For optimum
performance we recommend the AV-
1301 drives just one pair of speakers,
but if need be you can power two
pairs of speakers (4ohms).
Some environments suffer from theft
so the AV-1301 has an integrated
lock anchor point. Just attach a
Kensington security tether to add
an extra level of visual and physical
security.
The maximum room size depends on
the reverberant qualities of the room,
and the program material you want to
play through the amplifier. As a rule of
thumb we recommend the maximum
room size is 8 x 6m.
The fully revised ball-joint brackets
have been updated to make them
easier for one person to install. With
flexible mounting options to allow
installers to arrange the loudspeakers
evenly throughout the room, the ball-
joint bracket allows exact positioning
to create an expansive stereo image.
Also included is a fall-arrest safety
cable to remove the risk of injury.
With a passive crossover to ensure
a smooth low-mid range response,
and a 4” driver dedicated to bass
and mid, the SP-1300 gives clearer,
crisper midrange. The ¾” silk dome
tweeter adds needle-sharp top end
all the way to 20kHz. 86dB sensitivity
belies that more effort has gone into
making these loudspeakers sound
good, rather than just being
outright loud.
Fully revised circuitry makes it the most robust amplifier in its class.
This workhorse works faultlessly in any environment: corporate,
education and training, or worship. It offers 4 x stereo inputs on the
rear panel, with another two microphone inputs on the front panel for
voice reinforcement. Simply plug in your iPod, laptop, CD player – or
any kind of device you need to amplify.
Attractive and discreet; Vision’s wall speakers offer
clear, powerful audio reinforcement in a compact
form factor. Available in black or white.
“
“
DAVE SAYS...
420 x 290 x 100mm
5.6kg
Black
4 x Stereo inputs via phono connectors
2 x Microphone inputs via 6.3mm jack
[No Phantom power (48v). Condenser
microphones must have own battery pack]
2 x 25w @ 8 ohms
Total Harmonic Distortion less than or
equal to 1% (80H~12.5kHz)
Frequency response (line in):
80Hz~12.5kHz(±2dB)
Signal to noise ratio (line in): more than or
equal to 77dB (A-weighted)
Rating input level/Impedance: line
in 500mV/47kohms Microphone in
15mV/600ohms
Power consumption (rating condition): less
than or equal to 90W
230V Internal Power Supply
n
1 x 2-phono to 2-phono cable 2m long
n
1 x 2-phono to 3.5mm minijack cable
2m long
n
1 x Euro Figure-8 Power cable 2m long
n
1 x UK Figure-8 Power cable 2m long
Manu code: AV-1301 / Part code: 1461107
AV-1301 +SP-1300W / Part code: 1532095
AV-1301 +CS-1300 / Part code: 1540772
Manu code: AV-1301+SP-1300B
Part code: 1520212
230 x 160 x 120mm
3.5kg (per pair)
70W RMS
4”
¾” Silk
Bare-wire spring type
8 ohms
86dB (1w/1m)
80Hz-20kHz
Black or White
n
Ball-point wall brackets with fall-arrest
cables
Manu code: SP-1300B / SP-1300W
Part code: 1461158 / 1461159
“
“
DAVE SAYS...