User manual

SP-5000M-GE2 / SP-5000C-GE2
- 68 -
7.4. Normal continuous operation (Timed Exposure Mode/Trigger Mode OFF)
This is used for applications which do not require triggering. In this mode, the video signal for the
auto-iris lens is available if AUX connector is configured with option Type 2.
For the video timing, refer to chapter 6.3.
Primary settings to use this mode
Trigger Mode: Off
7.5. Timed mode
This mode allows a single image frame to be captured with a preset exposure time by using the
external trigger. Additional settings determine if the trigger pulse can be accepted during the
exposure period.
Primary settings to use this mode
Exposure Mode: Timed
Trigger Mode: ON
Trigger Option: OFF
7.5.1 If the overlap setting is “OFF”
Trigger
CCD
Exposure
XEEN
FVAL
Exposure
Active
Exposure Period
t5
t1
t2
t3
t4
t1
t2
t3
t4
t5
2L (Min)
30 µs
10.13 µs
2.51 µs
8L to 9L (18.142 µs)
Fig.34 Overlap OFF