User manual

ManualsBrandsVision ManualsComputer equipmentSP-5000

SP-5000M-GE2 / SP-5000C-GE2

- 5 -

7.3.2 Trigger Mode ....................................................................................- 66 -

7.3.3 Trigger Source ..................................................................................- 66 -

7.3.4 Trigger activation ..............................................................................- 67 -

7.3.5 Trigger Overlap .................................................................................- 67 -

7.4. Normal continuous operation (Timed Exposure Mode/Trigger Mode OFF) ................- 68 -

7.5. Timed mode .........................................................................................- 68 -

7.5.1 If the overlap setting is “OFF” ..............................................................- 68 -

7.5.2 If the overlap setting is “Readout” .........................................................- 69 -

7.6. Trigger width mode ................................................................................- 69 -

7.6.1 If the overlap setting is “OFF” ..............................................................- 69 -

7.6.2 If the overlap setting is “Readout” .........................................................- 70 -

7.7. RCT mode ............................................................................................- 71 -

7.8. PIV (Particle Image Velocimetry) ................................................................- 72 -

7.9. Sequence ROI Trigger ..............................................................................- 73 -

7.9.1 Video send mode ...............................................................................- 73 -

7.9.2 Trigger Sequence mode basic timing .......................................................- 74 -

7.9.3 Sequence ROI setting parameters ...........................................................- 74 -

7.9.3.1 Sequence index table (Default) ........................................................- 74 -

7.9.3.2 Descriptions of index table parameters ..............................................- 74 -

7.10 Multi ROI function .................................................................................- 76 -

7.10.1 Multi ROI setting parameters ...............................................................- 77 -

7.11. Operation and function matrix .................................................................- 78 -

8. Other functions ........................................................................ - 79 -

8.1 Black level control ..................................................................................- 79 -

8.1.1 Black Level Selector ...........................................................................- 79 -

8.1.2 Black Level ......................................................................................- 79 -

8.2 Gain control ..........................................................................................- 79 -

8.2.1 Gain Selector ...................................................................................- 80 -

8.2.2 Gain ..............................................................................................- 80 -

8.2.4 Gain Auto ........................................................................................- 80 -

8.2.5 Balance White Auto ............................................................................- 81 -

8.3. LUT ...................................................................................................- 81 -

8.3.1 LUT Enable ......................................................................................- 81 -

8.3.2 LUT Index ........................................................................................- 82 -

8.3.3 LUT value ........................................................................................- 82 -

8.4. Gamma ...............................................................................................- 82 -

8.4.1 Linear and Dark Compression ................................................................- 82 -

8.5. Shading Correction .................................................................................- 83 -

8.6. Blemish compensation ............................................................................- 84 -

8.7. Bayer color interpolation (Only for SP-5000C-GE2) ..........................................- 84 -

8.8 Lens control ..........................................................................................- 85 -

8.8.1 About P-Iris .....................................................................................- 85 -

8.8.2 Setting for P-iris lens being used ............................................................- 86 -

8.8.2.1 P-Iris lens select ..........................................................................- 86 -

8.8.2.2 Step max. ..................................................................................- 86 -

8.8.2.3 Position .....................................................................................- 86 -

8.8.2.4 Current F value ...........................................................................- 86 -

8.8.2.5 P-Iris Auto min. / P-Iris Auto max. .....................................................- 86 -

8.8.3 Motorized lenses ...............................................................................- 86 -

8.8.3.1 Iris ...........................................................................................- 86 -

8.8.3.2 Zoom ........................................................................................- 87 -

8.8.3.3 Focus+ ......................................................................................- 87 -

8.9 ALC ....................................................................................................- 87 -