User manual

SP-5000M-GE2 / SP-5000C-GE2
- 33 -
Table 10. Line Source
Line Source item
Description
Low
Connect Low Level signal to line item selected in Line Selector, Default setting
High
Connect High Level signal to line item selected in Line Selector
Frame Trigger Wait
Connect Frame Trigger Wait signal to line item selected in Line Selector
Frame Active
Connect Frame Active signal to line item selected in Line Selector
Acquisition Trigger Wait
Connect Acquisition Trigger Wait signal to line item selected in Line Selector
Acquisition Active
Connect Acquisition Active signal to line item selected in Line Selector
Exposure Active
Connect Exposure Active signal to line item selected in Line Selector
FVAL
Connect FVAL signal to line item selected in Line Selector
LVAL
Connect LVAL signal to line item selected in Line Selector
PulseGenerator0 Out
Connect Pulse Generator 0 signal to line item selected in Line Selector
PulseGenerator1 Out
Connect Pulse Generator 1 signal to line item selected in Line Selector
PulseGenerator2 Out
Connect Pulse Generator 2 signal to line item selected in Line Selector
PulseGenerator3 Out
Connect Pulse Generator 3 signal to line item selected in Line Selector
User output 0
Connect User Output 0 signal to line item selected in Line Selector
User output 1
Connect User Output 1 signal to line item selected in Line Selector
User output 2
Connect User Output 2 signal to line item selected in Line Selector
User output 3
Connect User Output 3 signal to line item selected in Line Selector
Line 5 Opt 1 In
Connect Opt 1 In signal to line 5 in Line Selector
Line 6 Opt 2 In
Connect Opt 2 In signal to line 6 in Line Selector
NAND 0 Out
Connect NAND 0 signal to line item selected in Line Selector
NAND 1 Out
Connect NAND 1 signal to line item selected in Line Selector
Line 10 TTL 2 In
Connect TTL 2 In signal to Line 10
Line 11 LVDS 1 In
Connect LVDS 1 In signal to Line 11
Note1: As for LVAL, some line items cannot be connected. Refer to “5.3.7.2 GPIO matrix table”
Note2: Line 10 and 11 are available if AYX Type 3 (Optional configuration) is selected.