User manual

Page 24
Chapter 6
Universal Seal / Medallion Holder
This universal clamp will hold 1-3 round objects at a time. It also has a place for the “eye” of a
medallion or tag. This clamp may be used to any diameter of notary seal. These clamps will fit
the Versa Vise or can be used directly on most T-slot table surfaces. They will also fit
Pantographs and other computerized systems that use the dowel pin system.
Pen & Seal Jig
These jaws enable engraving on all types of pens and other small cylindrical objects. Rotating
the jaws 180º allows engraving on medallions, notary seals, pet tags and other round objects.
These jaws will fit the Versa Vise or can be used directly on most T-slot table surfaces. They will
also fit Pantographs and other computerized systems that use the dowel pin system.
Seal Jig
Designed for notary seals of all diameters. Rotating the jaw 180º will allow clamping of both
large and small sizes. These jaws will fit the Versa Vise or can be used directly on most T-slot
table surfaces. They will also fit Pantographs and other computerized systems that use the dowel
pin system.
(Figure 7.5) Seal Jig
(Figure 7.4) Pen & Seal Jig
(Figure 7.3) Universal Seal / Medallion Holder