User manual

Page 21
Frequency Maintenance Items
As needed 1. Vacuum and/or brush
2. Clean vacuum canister filters
Every Day 1. Remove chips form the spindle if
you do not have a vacuum chip
removal assembly.
Every Week 1. Lubricate steel X, Y lead screws
Every Month 1. Lubricate the Z-Axis lead screw
Every Six Months 1. Check the brushes and replace if
necessary.
2. Lubricate the Z-Axis linear bearing
MAINTENANCE SCHEDULE
Following is a suggested maintenance schedule. Remember that in conditions of prolonged use,
unusual environments, or unusual applications, maintenance items may need to be performed
more frequently than suggested in this schedule.
Chapter 5