User manual

Page 11
Connection of Power, Cables, and Controllers
Additional boxes may have been shipped along with your table, depending on the system ordered.
These will typically include a control unit and associated cables. The proper connection of these
cables is essential. Check the appropriate user’s manuals for your controller before attempting to
connect them it to the table. After connection of the cables as directed by your controller manual,
power can be connected to the system. It is suggested that a surge protector be used. (Surge
protectors--often called “power strips” can be purchased inexpensively at your local hardware
store.) This will allow powering all of the elements of the system at once.
NOTE: Most of the newer Vision Serial Controllers include a surge protector.
Chapter 3:Chapter 3:
Chapter 3:Chapter 3:
Chapter 3:
SeSe
SeSe
Se
tting Utting U
tting Utting U
tting U
p The Tp The T
p The Tp The T
p The T
ableable
ableable
able
(Figure 3.1) 25-pin Breakout Connector to the Vision Serial Controller
Chapter 3
Left side view of the Phoenix Engraver
Back view of the Vision Serial Controller