User manual

Application Preferences

461

UM-2014.1-07

SDI Link

This specifies the default video card SDI colourspace and format.

Values :

YCrCb 422, RGB 444, YCrCb 444, Dual YCrCb

422, 12 bit YCrCb 422, 12 bit YCrCb 444

Default :

YCrCb 422

Default Format

This specifies the default video card SDI video format to use.

Values :

PAL, NTSC, 720p, HD 1080i, HD 1080psf, HD

1080p, 2k p, 2k i

Default :

HD 1080i

Always use default format for monitoring

When enabled, the monitor is locked to the format set above and will not try

and switch to a new format, even if its input changes.

This is useful if your output monitoring device does not support some

output formats and you wish to lock it to something supported.

Priority Format

Use : Frame based project output formats

This setting is only relevant if we are using a progressive (frame) based (non-

interlaced) project output format.

If we have a progressive output format (e.g. HD 1080p), this specifies whether

we set our video I/O card to output a progressive signal ("p", Match p format)

or a progressive segmented fields signal ("psf", Match psf format).