User manual

Appendices

460

UM-2014.1-07

Always use default format for monitoring

When enabled, the monitor is locked to the format set above and will not try

and switch to a new format, even if its input changes.

This is useful if your output monitoring device does not support some

output formats and you wish to lock it to a supported format.

Enable OpenGL readback to Video

This setting enables the OpenGL graphics on your display monitor to be sent

to the video board output for display in realtime. This includes the colour

grading as well as any HUD or graphs displayed.

This setting is only supported for NVIDIA FX4600 graphics cards (or

better) and DVS Centaurus2 video boards.

OpenGL read-back is not compatible with the Interlaced Stereo DVI

setting below. When enabled, the Interlaced Stereo DVI setting will

be hidden.

Interlaced Stereo DVI Output

When enabled, Interlaced Stereo DVI Output will convert the DVI signal to a

left and right stereo channel mode.

This stereo mode is supported on display devices like the Zalman

ZM-M220W 3D LCD monitor.

Interlaced Stereo mode is incompatible with OpenGL read-back

and will be hidden if read-back is enabled.

Enable SDI I/O Card

Use : Video I/O and Monitoring via video I/O card

These settings relate to your SDI video card (e.g. Centaurus2, Bluefish Lust).