User manual

Appendices
454
© 2014 Digital Vision
UM-2014.1-07
the control panel and the GUI interface.This configures the colour
arrangement on the trackball.
Values :
Vector. Offset, Offset 30, Offset 330
Default :
Vector
Offset corresponds to the old Rank system
As you change this setting the trackball image next to the drop-down will
update, indicating the current colour orientation :
The Trackball Orientation setting also appears in the Control Panel
preferences screen.
Printer Points Per F-Stop
Range :
User set
Default :
8
This setting specifies the number of printer points used to represent an f-stop
for the printer lights tool.
Positive
With the Positive setting enabled, the number you enter will add colour.
Uncheck Positive to remove colour.
Printer Neutral
Range :
User set
Default :
25
This value represents no change in the printer lights settings.