User manual

Projects
42
© 2014 Digital Vision
UM-2014.1-07
Colour Management System (CMS)
Each defined output format can have an independent colour Look Up Table
applied (LUT) as part of your Colour Management System (CMS).
A variety of LUT formats and CMS systems are supported, including the
Nucoda CMS, THX Cinespace and Kodak.
The LUT can be used in two ways :
As a viewing only LUT. The LUT is not rendered on the final output.
The LUT can be selected and toggled on/off inside the project.
As a rendered LUT on the output. Pressing the Apply CMS button
marks the selected output format with CMS and burns in the LUT on
this format.
Sample CMS LUT files are provided in the folder :
C:\Phoenix\2014_1\root\cms
Project Sources and Proxies
Project Sources refer to source material available inside a project and how
the source media is presented.
The "1:1 Source Clip" source is always present and refers to your pristine,
original source material (imported or captured), at whatever original resolution.
Optionally, you can add one or more proxy sources via the New button.
A proxy source will act as a substitute source in the project.
You may decide to add a proxy source if :
Your original sources are located on a slower storage device (e.g.
network). In this case, you may wish to add a "1:1 Clone" source to
ensure fast access to (local) fast storage.
Your original sources are large, you may wish to add a "2:1" proxy to