User manual

Listing Information
427
© 2014 Digital Vision
UM-2014.1-07
Command :
$ film_master --list
Projects:
1: test1 - C:\Nucoda\...
2: Check Danger 002 - C:\Nucoda\...
3: Check Danger 003 - C:\Nucoda\...
4: Road Less Travelled Part 1 - C:\Nucoda\...
5: Who Goes Here - C:\Nucoda\...
6: Mist Snow Fog and Rain 1 - C:\Nucoda\...
7: Mist Snow Fog and Rain 2 - C:\Nucoda\....
8: Road Story 002 - C:\Nucoda\2009_1\....
9: et - C:\Nucoda\2009_1\....
10: et2 - C:\Nucoda\2009_1\....
Listing Compositions
To list compositions available within a project, use the command:
Command :
$ film_master --project PROJ1 --list
INFO Opening project "et2" from "C:\Phoenix\2014_1\root\projects\et2".
Compositions in project "et2" of "C:\Phoenix\2014_1\root\projects\et2":
1: Comp - imported from C:\Temp\et.edl ...
2: Graded 001 - Tue 16 Feb 2010 16:22:13
3: Check - Tue 16 Feb 2010 16:22:14
List Captured Material
--capture-list
This option lists the status of captured material from the specified
composition. It is only relevant if the composition contains list captured
material.
Command :
$ film_master --project et2 --composition Comp \
--capture-list
INFO Opening project "et2" from "C:\Phoenix\2014_1\root\projects\et2".
INFO Opening composition "Comp".
Clip(s) from composition "Comp" in project "et2" of ..
|Clip | Start | End | Tape | Status
----+------------------------+-------------+-------------+----------+--------
1| blue.[27-127] | 00:00:01:02 | 00:00:05:02 | blue | Ready
2| green.[203-272] | 00:00:08:03 | 00:00:10:22 | green | Ready
3| purple.[1085-1185] | 00:00:43:10 | 00:00:47:10 | purple | Ready
4| yellow.[39-88] | 00:00:01:14 | 00:00:03:13 | yellow | Ready
INFO Opening composition "Comp".
Once captured the shot Status field will change to Found.
List Clips and Associated Material
--clip-list [s]