User manual

Projects
40
© 2014 Digital Vision
UM-2014.1-07
output format) if the source format differs from the output. If the source
format matches the output, an output cache is generated if any Master
layer effects are added. Cache Output can be set independently on any
project output format.
Enable this :
To ensure everything is rendered and ready to lay-off to video.
On a 10 bit secondary output format when your master format
(and sources) are half-float or 16 bit. Cache Output will ensure
that the secondary format caches are 10 bit which can improve
realtime performance.
This cache is in addition to the standard (source-format)
cache.
frame / field rendering
Full support for interlaced video formats is included.
Options :
frames
Progressive format, no fields.
fields (f1:f2)
Fields, with field order f1:f2 [PAL]
fields (f2:f1)
Fields with field order f1:f2 [NTSC]
Field settings will enable field edits/cuts in the composition, field viewing,
playback and rendering.
Conversion Settings
If your source images are a different resolution to your defined output, you can
choose if and how they are scaled and/or cropped for output.
None
Displays the source image in its original size. This may result in a
cropped or blanked image, depending on the difference between the
source and output resolution and aspect ratio.
Auto Fit
Scales the source image to the size of the output format.
Auto Crop
Crops the source image and scales it to the size of the output format.
Center
The center of the source image is mapped to the center of the output