User manual

Creating Projects
39
© 2014 Digital Vision
UM-2014.1-07
media in the project library.
It is possible to create compositions with different frame rates
within a single project. The Library/New Composition button
always creates a timeline at the frame rate set on the currently
selected output format. You can create a composition at a
different frame rate by changing the rate of the output format
(at the project screen), creating the New Composition, then
reverting the output format rate again.
Colour Channels
Default : RGB
Use this drop-down to select the colour channels to use. This defines
the components used in any cache generated.
This is an advanced setting. In general, do not change this.
Component Bit Depth
Default : 10 bit
Use this drop-down to select the bits per component (colour accuracy)
that you want the output format to render.
Component Bit Depth is an advanced setting and usually
should be left at the default.
Render Resolution
The image width and height, in pixels, are set automatically when you
choose one of the preset formats from the setup menu. If you want to
define a different image size for your output format then simply enter
the values into the appropriate text boxes; in doing so, the default format
will automatically change itself to Custom Setup.
Viewing Aspect Ratio
The aspect ratio for viewing images is set automatically when you
choose one of the default formats from the setup menu. If you want to
define a different aspect ratio for your output format then simply enter
the value into the appropriate text box; in doing so, the default format will
automatically change itself to Custom Setup. You will be able to toggle
the aspect ratio correction on/off when viewing images.
Render Options
Cache Output
Default : OFF
Enabling Cache Output will cause output caches to be generated (in the