User manual

Video I/O
366
© 2014 Digital Vision
UM-2014.1-07
During capture, the Capture marked button will turn red and the VTR deck will
cue to the pre-roll point before the marked timecode in-point.
Once the mark-in position is reached the capture will commence and at this
point the Stop Capture button will become enabled.
Once complete, the capture will stop automatically. You can interrupt the
capture at any time by pressing the Stop Capture button.
Once capture has stopped, the captured footage will automatically be added
to your project library.
Capture List
The Capture List method requires an existing event list.
This list is usually created by importing a list file (such as an EDL) and then
capturing and conforming the events. Refer to the section on importing list
files for detailed instructions on creating a composition based on a list file.
Once you have imported the list file, the corresponding composition will
appear in the Library and the events that need to be captured will appear on
the timeline.
No media will exist in the library until it is captured and conformed to
this empty timeline.
Inside the capture module, the list events are shown on the right.