User manual

Video Capture
363
© 2014 Digital Vision
UM-2014.1-07
Prior to attempting any capture you should always review and adjust
all the values in the settings tab as appropriate for your material and
composition.
Capture Locations
Defaults : As per general.prefs preference file.
Use the tick boxes to choose which data streams to capture - video, audio or
both.
The capture paths are shown and can be edited in place, or set via the file
browser (click the icon).
If you change a path here, the new location will be saved to the
general.prefs preference file.
For optimal performance, the audio and video capture locations
should be set to separate disk volumes in order to optimise
concurrent disk-writes (and minimise interference). For example,
capture video to the S:\ volume and audio to the W:\ volume.
Deck Status
The deck status is displayed in a summary line at the bottom of the controls
tab.
Information displayed is :
VTR/deck model,
Frame rate
Control status.
If the VTR deck is record inhibited, this will be shown as REC Lock.