User manual

VTR Settings

359

UM-2014.1-07

SDI Output

This shows the video format (resolution and frequency) of the video output

signal

Video Format settings

capture

output

Colour Space control

The first drop-down button allows you to set the colour space mode for your

material.

YCrCb 422

RGB 444

RGB Scaling control

The second drop-down allows you to set the video scaling mode that the

application should apply to the material:

Linear (SMPTE) - no scaling

Linear (CGR) - signal is scaled

This setting is very important in order to ensure that what you see on

your monitor is what you will get on output. For a discussion of

Colour Scaling modes, see the Setup Manual.

FPS control

VTR Capture only.

For certain bandwidth intensive formats we need to specify an optimal capture

rate to use.

Default FPS - the default is the composition frame rate

Use 14.98 FPS (2K)

Use 15.00 FPS (2K)