User manual

DVO Upscale
329
© 2014 Digital Vision
UM-2014.1-07
Advanced mode only
Edge sharpening amount
Texture
Values :
0 - 100
Default :
100
Advanced mode only
Balances flat area texture and sharpening noise.
Recommended settings are 100 for normal images and 0 for graphics. If flat
area noise is intrusive a setting lower than 100 will give less noise at the
expense of texture definition.
Deinterlace Control
In an analogue video signal there may be a visible half lines (unless removed
when captured) i.e. half the line is blanked and the rest of the line contains
image information. The last half line is usually unwanted when de-interlacing.
To remove the blanked part, enable Half Line Fix and select the line(s) to
address for top (Top Fix Lines) and bottom (Bottom Fix Lines). This will
ensure that the blanked part of the line is not visible in the final image.
Blanking
Blanking controls can be used to cover up soft image edges or any other edge
related problem.