User manual

DVO Twister
323
© 2014 Digital Vision
UM-2014.1-07
50i to 23.98p
50i to 24.00p
50i to 29.97p
50i to 59.94i
50i to 60.00p
59.94i to 23.98p
59.94i to 24.00p
59.94i to 25.00p
59.94i to 50i
59.94i to 50p
50p to 60p
60p to 50p
23.98p to 29.97p
23.98p to 50.00i
29.97p to 23.98p
29.97p to 50.00i
16.00p to 24.00p
16.00p to 25.00p
18.00p to 24.00p
18.00p to 25.00p
20.00p to 24.00p
20.00p to 25.00p
Processing Mode
Values :
Narrow, Medium, Wide, Auto
Default :
Narrow
The Processing Mode affects how motion is detected and selects between
three main modes. The Auto mode automatically selects the most appropriate
setting based on the source and target mode chosen.
Only has an effect when Motion Mode is set to Motion Comp.
Motion Mode
Values :
Motion Comp, Interpolated, Nearest Frame
Default :
Motion Comp
This determines how the images are recreated in the target format.
Motion Comp
This uses motion compensation and is the default. This allows the
accurate recreation of fields and frames using the Digital Vision Phame
motion vector algorithms.
Interpolated
This is a simple method that recreates correct target fields and frames
by careful mixing of the input source. This method will often produce a
lower quality result than the motion compensated approach (blurs, jerky