User manual

DVO Effects
302
© 2014 Digital Vision
UM-2014.1-07
Starting with enabling Basic mode and selecting one of the available
preset modes will automatically set up spatial threshold/size
Chroma Trim
The Chroma Trim controls are used to adjust the grain/noise reduction on
each selected colour. This allows for the boosting or cutting of both the spatial
and temporal filter settings within the selected colour.
Range :
-8 to 7
Default :
0
The colours 1, 2, 3, are selected via the key tab, as described in the Chroma
Adaptation section below.
Having a temporal strength of 7, setting up chroma adaptation for a
red colour and corresponding trim to +2, will set the temporal
strength to 7+2=9 for areas in the picture that contain the selected
red colour.
Other
Pos/Neg Trim
The Pos/Neg Trim control works in conjunction with the Pos/Neg mode
controls in the Setup section. Having selected the mode and luma thresholds