User manual

DVO Effects
300
© 2014 Digital Vision
UM-2014.1-07
In addition to the above controls, the motion sensitivity control on the Setup
section adapts the temporal filtering in respect to grain size and intensity
Spatial Filtering
Edge-preserving spatial filtering complements the adaptive temporal filters by
processing grain and noise in portions of the image that are detected as being
in motion, while leaving non-moving areas unaffected. The spatial filtering is
done before application of the temporal filters and works in unison with DVO
Grain’s motion processing.
Spatial Strength
This is the overall level of spatial filtering applied in each channel. Normally,
they should match the temporal strength.
Range :
0 to 15
Default :
7
Spatial Size
The Spatial Size drop-down lists adjust the spatial size of the grain/noise,
in pixels, for each channel.
Values :
1,3,5,7,9
Default :
7
Setting R, G, B spatial size equally will give best performance
Spatial Threshold
The spatial threshold determines when to filter, depending on the intensity of
the surrounding pixels.
Range :
0 to 100
Default :
7