User manual

DVO Grain
297
© 2014 Digital Vision
UM-2014.1-07
Enable Basic
The Enable Basic toggle button allows you to enable/disable DVO Grain
basic mode.
When you edit any of the settings in the Processing or Setup tabs
basic mode becomes disabled automatically. Similarly, when you
select a Mode from the basic modes, all settings in the Processing
or Setup tabs will be adjusted automatically to fit the selected mode
and basic mode will be automatically enabled.
Presets
The Mode sets a basic preset level of grain reduction :
Values :
Default, Film fine (or video), Film medium, Film coarse
Default :
Default
Default is roughly equivalent to Film medium
Strength
The amount of grain/noise reduction is automatically set up in the basic mode.
This slider control allows you to tune this, and increase or decrease the
amount of grain reduction done.
Range :
-2 to 2
Default :
0
Out Mix
The Out Mix control determines the mix between the processed image (with
grain removed) and the input image to give the final output image.