User manual

DVO Steady
287
© 2014 Digital Vision
UM-2014.1-07
The Blanking Mode determines whether to use a masked or a full image.
Set blanking mode to Specific and specify Blanking Size if blanking (mattes)
should be added to the processed pictures.
Disable - Use complete image
Specific - Apply blanking (mattes) according to Blanking Size controls
- Default
Border Size
Range :
0 - 2048
Default :
0 pixels
This specifies the number of pixels from the each edge of the picture.
Scene Cut
Determines if the first/last frame of a scene/shot should be adjusted (Low/
Medium/High Safety) or not (Fixed). Start and End mode are set separately.
Under certain circumstances (typically for very unsteady material), a
Fixed setting might look wrong.