User manual

DVO Steady
285
© 2014 Digital Vision
UM-2014.1-07
Quality Safety
Adaptively reduces the unsteadiness correction in accordance with an
analyze quality measure recorded during the analyse pass.
Range :
0 - 10
Default :
3
Under certain circumstances, the analysis may be complex and more difficult.
This is signaled by a quality value.
When the analysis quality is low, errors are more likely to occur. In this case a
high setting of the Quality Safety control limits the allowed unsteadiness
correction in such parts of the material, so that any errors will become less
obvious.
A low setting generally ignores the analysis quality.
Mask
Mode
Determines if and how the (shaking) borders should be masked.
Values :
Disable, Follow Max Adjust, Specific
Default :
Follow Max Adjust
where :
Disable - Less safety. Less accurate.
Follow Max Adjust - Use settings as per Max Adjust parameter