User manual

DVO Effects
284
© 2014 Digital Vision
UM-2014.1-07
Used to set how much the unsteadiness should be decreased, with separate
controls for horizontal (X) and vertical (Y) reduction.
Range :
0 - 100
Default :
100 %
Reduction is typically set to 100% to achieve maximum correction.
A bit of residual unsteadiness might be necessary to create a more
natural result sometimes e.g. a camera shaking during frame
capture resulting in motion blur.
Max Adjust
Sets a maximum limit (in pixels) for how much the process is allowed to
adjust the stabilized frames, with separate horizontal (X) and vertical (Y)
controls.
Range :
0 - 100
Default :
20 pixels
Motion Safety
Adaptively reduces the unsteadiness correction based on motion.
Range :
0 - 10
Default :
5
In high motion sequences, errors are more likely to occur. A high Motion
Safety setting limits the allowed unsteadiness correction so that any errors
will become less obvious.
A low setting ignores almost all motion.