User manual

DVO Steady

283

UM-2014.1-07

the footage was shot with a video camera, select a linear format. If this

control is not set correctly the material may not be processed properly.

Default :

From Project

Analyze

This toggle button enables the analysis function.

Currently, once analysis is complete, it should be turned off to enable

rendering.

After analysis, if you change any of the processing parameters you

will need to re-run the analyse step.

Peak / XOffs / YOffs

Once analysis is complete, these display some statistical results.

Aggressiveness

This parameter determines how aggressive the effect should be in attacking

unsteadiness.

Range :

1 - 10

Default :

Low values are used for fine errors (small and quick) e.g. introduced by a

scanner/telecine and does not try correct for slower and larger movements.

High values does not only take care of fine errors but also handles coarse

errors (large and slow) like very old material or handheld/shaky cameras.

Reduction