User manual

DVO Effects

282

UM-2014.1-07

ROI Size

This is the number of pixels from each edge where the frame (active area)

starts.

Range :

0 to 2048

Default :

0 pixels

Only borders which have visible “non-clipped" film frame edges must

(can) be used and Region of Interest must be set to include those.

Processing

Processing parameters are applied to the pictures in accordance with the

result from the analyze pass.

Basic Setup

Enable

This toggle button allows you to enable/disable the effect. By default, as soon

as the effect is added it is applied/enabled

Colour

The drop-down list will default to the project setting for the input format. You

need to set this control according to the material that you are working with. If