User manual

DVO Print Align
275
© 2014 Digital Vision
UM-2014.1-07
DVO Scratch
DVO Scratch processes vertical/continuous scratches.
These are typically those not being detected by dust/dirt removers, which are
looking for random defects in the picture. The process is fully automatic and
has an advanced detection algorithm with a fill-in result far superior to the
normal process of hiding the defect using information from both sides of the
scratch.
Basic Settings
Enable
This toggle button allows you to enable/disable the effect. By default, as soon
as the effect is added it is applied/enabled.
Colour
The drop-down list will default to the project setting for the input format. You
need to set this control according to the material that you are working with. If
the footage was shot with a video camera, select a linear format. If this
control is not set correctly the material may not be processed properly.
Default :
From Project
Scratch Detection Parameters
Colour Mode
This determines the image channels detection is undertaken in.
Values :
Y, R+G+B, R,G,B
Default :
Y
where :